Awacino ZeroTrust Company Network

Network access without a gateway

Devices dial out and connect directly, so nothing in the company network waits for the internet.

The classic approach

The VPN gateway is the exposed part

Remote access to a company network usually means something inside it that accepts connections from the internet.

A gateway to run

A VPN appliance or server sits at the edge of the company network. It has to be bought, patched, renewed and kept reachable from the internet.

An inbound port

Whatever waits for connections from outside can be found and tried. The gateway that protects the network becomes the target.

Configuration per client

Profiles, routes and subnets are handed out to every user, and a second address plan has to be kept in line with the real network.

How Awacino does it

Checked, introduced, then direct

  1. 1

    Both ends dial out

    A device in the company network - a PC, a Mac or a server with the unattended client - and the member's laptop or phone both connect outbound to Awacino. Nothing is opened on the firewall.

  2. 2

    Policy check

    The member signs in with the company account. Before the connection starts, our server checks the member's role, the devices assigned to them and, with 2FA on connect, a fresh second factor. A failed check refuses the connection and is written to the audit log.

  3. 3

    Direct, end-to-end encrypted

    Our servers introduce the two devices and step aside. The data flows directly between them, end-to-end encrypted, also behind CGNAT and on mobile networks. It does not pass through our servers.

SituIP

A real address, not a parallel network

When a member beams out, their device gets a SituIP: a real address in the target network, often leased by that network's own router. A laptop in a hotel gets 10.20.0.47 in the office network 10.20.0.0/24; the ERP at 10.20.0.10 and the file share at 10.20.0.20 keep their addresses.

If the connecting device's own network uses the same range, it gets a private 100.64.x.x address instead.

  • Visible in the router's lease table like any other client
  • No subnet router and no route to approve
  • Documentation, bookmarks and connection strings stay valid
office network · 10.20.0.0/24 ERP · 10.20.0.10 files · 10.20.0.20 SQL · 10.20.0.30 10.20.0.47 laptop Beam out
For IT

What changes for the IT team

No inbound ports

Devices only dial out. The company network has nothing that answers a scanner on the internet.

No gateway to patch

No VPN appliance to buy, patch, renew and keep reachable. App updates roll out with your MDM.

No client configuration

Staff install the app and sign in with the company account. There are no profiles, routes or subnets to hand out.

Access per device

Each device has its own identity and is registered to the company. A device that is removed no longer gets in.

Access per code

A Beam-in code reaches exactly what you choose in one network - the whole network, one device, or one port on a device - belongs to the first device that redeems it, and is refused at once when revoked. Several networks? Use one code per network - side by side in the app.

Beam in

Offboarding in one step

Deactivate a user and their sessions end, live connections close and their key copy is deleted.

Compare

VPN gateway and Awacino

VPN gatewayAwacino
In the company networkA gateway or appliance that faces the internetOne device that is already there dials out
Inbound portYes, on the gatewayNone
Data pathThrough the gatewayDevice to device, end-to-end encrypted; not through our servers
AddressesA VPN address plan beside the real networkA SituIP in the network itself
Setup and upkeepA gateway or appliance to patch and monitor; a VPN profile, routes and subnets set up on every client device, redone for every new deviceOne app or one small client per network; each device signs in with the user's account or a Beam-in code; nothing to configure on the router or per device
Check per connectionAt the gateway loginRole, assigned devices and optional 2FA on connect, before every connection
Outside helpA VPN account for the partnerA Beam-in code for exactly what you choose: the whole network, one device or one port - one code per network, several codes side by side; revocable
LicensingOften per personPer user; only Beam-in devices count, not the devices you reach through them
FAQ

Questions IT teams ask

Do we have to open a port on the firewall?

No. The device in the company network and the member's device both dial out; nothing in the company network is reachable from the internet.

Does our data pass through Awacino's servers?

No. Our servers carry sign-in and the introduction of two devices. Screens, files, databases and commands go device to device, end-to-end encrypted.

Do we install Awacino on every machine we want to reach?

No. Awacino runs on one device in the network, a PC, a Mac or a server with the unattended client. With a SituIP, the other machines answer by their usual addresses.

What do we pay for?

Users, Beam-in devices and active Beam-in codes. Beam-in devices count; the devices you reach through them (printers, NAS, PCs in that network) are not counted.

See it on your own network

Install it on one device in your office network and beam out from a staff laptop. For a guided start, book a demo.