
Setup unattended access
A home server, NAS or Raspberry Pi - always ready, with nobody logged in.
Three steps, a few minutes
- 1
Create your account
In the Awacino app, on your phone or laptop. Free usage with 2 Beam-in devices and 10 Beam-in codes.
- 2
Install the Unattended Client
On the home server, NAS or Raspberry Pi. It runs headless and needs no admin rights.
- 3
Beam out
The device appears in My devices. Tap Beam out and you are in its network.
Does your board run it?
230 boards from 65 vendors – the list grows with every new installer.
Install it from the NAS web interface
On a NAS, the Unattended Client runs as a container. You install it in the NAS's own web interface, the same place you install any other app there. No terminal, no SSH, no router settings.
- 1
Get your setup code
In the Awacino app, go to Add unattended device and open Install on NAS. The app shows a one-time setup code and a ready compose file with the code already in it. Copy it.
- 2
Paste it on the NAS
Open the NAS web interface in your browser, go to its container app (see below) and create a new project from the copied file.
- 3
Beam out
A few seconds later the NAS appears in My devices as an unattended device. Tap Beam out and you are in its network.
Where to paste it
Synology
Container Manager → Project → Create. Paste the file and click Done.
QNAP
Container Station → Create Application. Paste the file and click Create.
TrueNAS SCALE
Apps → Discover → Custom App, then paste the file as YAML.
Unraid
Settings → Docker → Template Repositories: add github.com/imagenotion/nas_unraid. Then Docker → Add Container → Template: awacino-unattended.
Using a terminal anyway? Save the file as compose.yaml and run docker compose up -d. SSH is off by default on most NAS systems and is not needed.
Home servers, NAS boxes and small boards
Linux home servers
x86 and ARM: the homelab box at home or a VPS in the cloud.
Raspberry Pi and SoC
Small boards that lend a whole network: at home, at your parents' or in the holiday flat.
NAS and Docker hosts
Wherever a headless Linux runs.
Mac and Windows
PCs that should be reachable without anyone at the keyboard.
Always reachable, never exposed
No inbound port
The client dials out. Nothing on the device is reachable from the internet.
Always reachable
The client runs on its own, day and night. Its network is ready to beam into, with nobody there.
One Beam-in device each
An Unattended Client is a Beam-in device while it is registered; the devices you reach through it are not counted.
Make a network always reachable
Put one small device into it once, and beam in whenever you need it.