Compare

Awacino vs self-hosted WireGuard

Self-hosted WireGuard needs your own VPN server; Awacino needs none.

In short

Self-hosted WireGuard (or OpenVPN) is a fast, open-source VPN you run on your own server or router. It needs a reachable public IP address, an open UDP port and key management. Awacino needs no server and no open port: both devices connect outwards and then directly. Choose Awacino if you are behind CGNAT or don't want to run and expose a VPN server.

Last checked: Nov 8, 2026

Side by side

self-hosted WireGuardAwacino
How it connectsTo your WireGuard server at a public IP addressDirect device to device, end-to-end encrypted; Awacino's servers only introduce the devices
What you installWireGuard on the server and on every clientAwacino on your device and on one device in the network you want to reach
Router changesAn open UDP port, often DynDNSNone: no port forwarding, no public IP address, no DynDNS
Without a public internet addressUsually fails without a public IPv4 addressWorks
Devices without an app (network storage, printer, machine controller)Yes, with routing set up on the serverReachable at their usual address through your SituIP
Your own tools (remote desktop, screen sharing, remote login)YesYes, any tool, unchanged
Guest accessCreate and hand out a new key and configA Beam-in code, switched off with one tap
Licence modelFree and open sourcePrivate: Beam-in devices and Beam-in codes, free for 2 Beam-in devices and 10 codes; companies: users, Beam-in devices and codes
Open sourceYesNo
PlatformsWindows, macOS, Linux, iOS, Android and moreiPhone, iPad, Mac, Android, Windows, Linux; Raspberry Pi, NAS and servers with the Unattended Client
Setup and upkeepA key and a configuration per device, made and handed out by hand; redone for every new device, router swap or line changeOne app or one small client per network; each device signs in with the user's account or a Beam-in code; nothing to configure on the router or per device

Typical setups; details vary by plan and version.

When Awacino is the better choice

  • You are behind CGNAT or DS-Lite.
  • You don't want to expose a server or manage keys and configs.
  • You want to give a guest access with one code instead of a config file.

Questions people ask

Is Awacino based on WireGuard?

Awacino uses its own direct, end-to-end encrypted connections between devices. You don't run or configure any VPN server.

Can I use WireGuard without a public internet address?

Not as a server you reach from outside without a public IP address or a relay. Awacino connects outwards from both sides, so it works behind CGNAT.

Does Awacino work without a public internet address?

Yes. Both devices connect outwards and then talk to each other directly, so you need no public IP address and no port forwarding - also behind CGNAT, DS-Lite and on mobile networks.

Can I use remote desktop, screen sharing or remote login with Awacino?

Yes. Your device gets a SituIP, a real address in the remote network, so the Remote Desktop, VNC and SSH tools built into Windows, macOS and Linux work unchanged.

Is Awacino free?

Private use is free for 2 Beam-in devices and 10 Beam-in codes. Companies are licensed by users, Beam-in devices and Beam-in codes - only Beam-in devices count, not the devices you reach through them - from Company Free to large fleets and MSPs with many customer networks.

Is Awacino open source?

No. Awacino is closed-source software by ImageNotion UG, Germany. Connections are direct and end-to-end encrypted; Awacino's servers never carry your data.

Product videos

Awacino in action

Get updated on new Awacino product videos: subscribe to our channel.

Subscribe on YouTube